Pesticide residues analysis in honey using ethyl acetate extraction method: validation and pilot survey in real samples

This paper presents a cost-effective and validated multi residue confirmatory method for the determination of 167 chemically different pesticides and a survey study on Cyprus honey samples. This method uses ethyl acetate for the extraction of pesticides from honey and the determination is performed with liquid chromatography (LC) coupled to mass spectrometry (MS) operating in tandem mode (MS/MS) and with GC–ECD (gas chromatography with electron capture detector) analysis. The LC-MS/MS analytical system is especially important in the analysis of polar and non-volatile pesticides. For the validation of the method, blank honey samples were spiked with 146 pesticides (organophosphorous, carbamates, triazoles, amides, neonicodinoids, strobilurines, phenylureas, bendimidazoles and others) for the LC-MS/MS analysis at three levels: 0.01, 0.05 and 0.1 mg kg^?1 and with 21 pesticides for the GC-ECD analysis at two levels: 0.01 and 0.05 mg kg^?1for organochlorines and 0.05 and 0.2 mg kg^?1for the pyrethroids. As blank sample, a sample of honey which did not contain detectable levels of the analytes sought was used. The validation study was in accordance to the DG SANCO guidelines. The scope of validation included recovery, linearity, limits of quantification and precision. Linearity is demonstrated all along the range of concentration that was investigated with correlation coefficients ≥0.98. Recoveries of the majority of compounds were in the 70%–120% range and were characterised by precision lower or equal to 20%. The validated method was used for a survey of 36 samples of honey produced in different areas of Cyprus and this is the first work on Cypriot honey samples investigating a broad range of pesticides. Only coumaphos was detected at concentrations higher than 0.01 mg kg^?1 in the 58.6% of the honey samples analysed for Coumaphos. The results were evaluated in accordance to the provisions of the Commission Regulation (EU) No 37/2010 on pharmacologically active substances and their classification regarding maximum residue limits (MRLs) in foodstuffs of animal origin. The concentrations of coumaphos in all positive samples were at levels much lower than the MRL.     

Separation and quantification of quantum dots and dissolved metal cations by size exclusion chromatography–ICP-MS

The prevalence of engineered metallic nanoparticles within electronic products has evoked a need to assess their occurrence and fate within environmental systems upon potential release of these nanoparticles. Quantum dots (QDs) are mixed-metal nanocrystals with the smallest of particle sizes (2–10 nm) that readily leach heavy metal cations in water, potentially creating a co-occurrence of nanoparticulate and dissolved metal pollutants. In this report, we develop a size exclusion chromatography–inductively coupled plasma–mass spectrometry method (SEC-ICP-MS) for the rapid separation and quantification of ~5-nm-sized CdSe/ZnS QDs and dissolved Cd²⁺ and Zn²⁺ cations in water. The SEC-ICP-MS method provided a wide chromatographic separation of CdSe/ZnS QDs and dissolved Cd²⁺ and Zn²⁺ cations only when using the smallest SEC column pore size available and an eluent composition that prevented loss of metals to column polymer surfaces by using a surfactant to ensure elution of QDs (ammonium lauryl sulfate) and a complexing ligand to ensure elution of metal cations (ethylenediaminetetraacetate). Detection limits were between 0.2 and 2 µg L^–1 for Cd²⁺ and Zn²⁺ among dissolved cation and QD phases, and ranges of linearity covered two to three orders of magnitude. Gold nanoparticles of sizes 5, 10, 20 and 50 nm were also effectively separated from dissolved Au³⁺ cations, illustrating the method applicability to a wide range of nanoparticle sizes and compositions. QD and dissolved metal concentrations measured by SEC-ICP-MS were comparable to those measured using the more conventional method of centrifuge ultrafiltration on split samples for dissolved and total metals. The applicability of the SEC-ICP-MS method to environmental systems was verified by measuring QDs and dissolved metals added to samples of natural waters. The method was also applied to monitoring CdSe/ZnS dissolution kinetics in an urban river water. The SEC-ICP-MS developed here may offer improved automation for characterising heterogeneous suspensions containing >1 µg L^–1 heavy metals.     

加速溶剂萃取-凝胶色谱净化高效液相色谱法测定动物源性食品中的胆固醇

采用加速溶剂萃取-凝胶色谱净化建立了动物源性食品中胆固醇检测的高效液相色谱方法。结果表明,胆固醇浓度在1.0~40.0mg/L范围内线性关系良好,加标回收率为89.1%~99.8%,相对标准偏差为3.1%~7.8%。该方法准确、灵敏度高,适用于富含脂类的动物源性食品中胆固醇的检测。     

A Combined Experimental and Theoretical Study on the Stereodynamics of Monoaza[5]helicenes: Solvent‐Induced Increase of the Enantiomerization Barrier in 1‐Aza‐[5]helicene

Helicenes and heterohelicenes are attractive compounds with great potential in materials sciences to be used in optoelectronics as ligand backbones in enantioselective catalysis and as chiral sensors. The properties of these materials are related to the stereodynamics of these helical chiral compounds. However, little is known about features controlling stereodynamics in helicenes; in particular, for heterohelicenes the position of the heteroatom could be relevant in this respect. Herein the complete stereodynamic characterization of monoaza[5]helicenes is shown by enantioselective dynamic HPLC and DFT calculations. At variance with previous theoretical calculations, 1‐aza[5]helicene shows a surprisingly high enantiomerization barrier, which is triggered by specific solvent interactions.     

Characterization of Diamond Nanoparticles by High-Speed Micro-Thermal Field-Flow Fractionation

Micro-thermal field-flow fractionation was used to characterize the particle size distribution of nanometer-sized diamond nanoparticles. Although the experimental conditions were chosen to perform high-speed separation, and, consequently, the resolution achieved experimentally was not very high, the application of the original correction method for the zone spreading allowed for obtaining of very good calculated particle size distribution or, explicitly, a true polydispersity index of the diamond nanoparticle sample. The future use of several samples of diamond nanoparticles of different average sizes and different surface chemistries should allow deeper insight into the effect of these particulate characteristics on the retention in micro-thermal field-flow fractionation.     

New approach to the determination phosphorothioate oligonucleotides by ultra high performance liquid chromatography coupled with inductively coupled plasma mass spectrometry

This text presents a novel method for the separation and detection of phosphorothioate oligonucleotides with the use of ion pair ultra high performance liquid chromatography coupled with inductively coupled plasma mass spectrometry The research showed that hexafluoroisopropanol/triethylamine based mobile phases may be successfully used when liquid chromatography is coupled with such elemental detection. However, the concentration of both HFIP and TEA influences the final result. The lower concentration of HFIP, the lower the background in ICP-MS and the greater the sensitivity. The method applied for the analysis of serum samples was based on high resolution inductively coupled plasma mass spectrometry. Utilization of this method allows determination of fifty times lower quantity of phosphorothioate oligonucleotides than in the case of quadrupole mass analyzer. Monitoring of ³¹P may be used to quantify these compounds at the level of 80 μg L⁻¹, while simultaneous determination of sulfur is very useful for qualitative analysis. Moreover, the results presented in this paper demonstrate the practical applicability of coupling LC with ICP-MS in determining phosphorothioate oligonucleotides and their metabolites in serum within 7 min with a very good sensitivity. The method was linear in the concentration range between 0.2 and 3 mg L⁻¹. The limit of detection was in the range of 0.07 and 0.13 mg L⁻¹. Accuracy varied with concentration, but was in the range of 3%.     

Feasibility of ultra-high performance liquid and gas chromatography coupled to mass spectrometry for accurate determination of primary and secondary phthalate metabolites in urine samples

Phthalates (PAEs) are ubiquitous toxic chemical compounds. During the last few years, some phthalate metabolites (MPAEs) have been proposed as appropriate biomarkers in human urine samples to determine PAE human intake and exposure. So, it is necessary to have fast, easy, robust and validated analytical methods to determine selected MPAEs in urine human samples. Two different instrumental methods based on gas (GC) and ultra-high performance liquid (UHPLC) chromatography coupled to mass spectrometry (MS) have been optimized, characterized and validated for the simultaneous determination of nine primary and secondary phthalate metabolites in urine samples. Both instrumental methods have similar sensitivity (detection limits ranged from 0.03 to 8.89 pg μL⁻¹ and from 0.06 to 0.49 pg μL⁻¹ in GC–MS and UHPLC–MS², respectively), precision (repeatability, expressed as relative standard deviation, which was lower than 8.4% in both systems, except for 5OH-MEHP in the case of GC–MS) and accuracy. But some advantages of the UHPLC–MS² method, such as more selectivity and lower time in the chromatographic runs (6.8 min vs. 28.5 min), have caused the UHPLC–MS² method to be chosen to analyze the twenty one human urine samples from the general Spanish population. Regarding these samples, MEP showed the highest median concentration (68.6 μg L⁻¹), followed by MiBP (23.3 μg L⁻¹), 5cx-MEPP (22.5 μg L⁻¹) and MBP (19.3 μg L⁻¹). MMP (6.99 μg L⁻¹), 5oxo-MEHP (6.15 μg L⁻¹), 5OH-MEHP (5.30 μg L⁻¹) and MEHP (4.40 μg L⁻¹) showed intermediate levels. Finally, the lowest levels were found for MBzP (2.55 μg L⁻¹). These data are within the same order of magnitude as those found in other similar populations.     

Versatile ligands for high-performance liquid chromatography: An overview of ionic liquid-functionalized stationary phases

Ionic liquids (ILs), a class of unique substances composed purely by cation and anions, are renowned for their fascinating physical and chemical properties, such as negligible volatility, high dissolution power, high thermal stability, tunable structure and miscibility. They are enjoying ever-growing applications in a great diversity of disciplines.     

Analysis of volatile organic compounds released from the decay of surrogate human models simulating victims of collapsed buildings by thermal desorption–comprehensive two-dimensional gas chromatography–time of flight mass spectrometry

Field experiments were devised to mimic the entrapment conditions under the rubble of collapsed buildings aiming to investigate the evolution of volatile organic compounds (VOCs) during the early dead body decomposition stage. Three pig carcasses were placed inside concrete tunnels of a search and rescue (SAR) operational field terrain for simulating the entrapment environment after a building collapse. The experimental campaign employed both laboratory and on-site analytical methods running in parallel. The current work focuses only on the results of the laboratory method using thermal desorption coupled to comprehensive two-dimensional gas chromatography with time-of-flight mass spectrometry (TD-GC × GC-TOF MS). The flow-modulated TD-GC × GC-TOF MS provided enhanced separation of the VOC profile and served as a reference method for the evaluation of the on-site analytical methods in the current experimental campaign. Bespoke software was used to deconvolve the VOC profile to extract as much information as possible into peak lists. In total, 288 unique VOCs were identified (i.e., not found in blank samples). The majority were aliphatics (172), aromatics (25) and nitrogen compounds (19), followed by ketones (17), esters (13), alcohols (12), aldehydes (11), sulfur (9), miscellaneous (8) and acid compounds (2). The TD-GC × GC-TOF MS proved to be a sensitive and powerful system for resolving the chemical puzzle of above-ground “scent of death”.